Product Description
The BTD-Q automatic electronic water descaler adopts a physical method and uses a composite alternating current technology to generate a high-frequency electromagnetic field to treat water, so as to change the physical structure of the water without changing the chemical composition of the water, so as to achieve scale prevention, scale removal, The purpose of sterilizing algae.
Product Parameters
| Power Supplying |
220V/50Hz |
| Scale Prevention |
≥ 99% |
| Working Pressure |
1.0Mpa/1.6MPa |
| Water Temperature |
≤ 90 Centigrades |
| Sterilization Efficiency and Algae Killing |
≥ 98% |
| Water Quality |
Hardness≤ 1000mg/L(for CaCO3) |
Product Features:
1. Small volum, low cost, easy to installation and operation.
2. Automatic intermittent, energy saving>60%
3. Sterilization rate up to 98%, has effects for magnetization health
4. Anti-scaling and descaling rate ≥ 99%
5. No pollution for the water quality and environment
6. Full automatic operation, stable and reliable working
Working Principle:
Scale Resist and Prevent
Based on electromagnetic theory, invented by Dr. Lorentz, the electric water descaler
stops calcium carbonate and magnesium carbonate formation. water absorbs electromagnetic energy, which physical structure changes and chain water molecules
break into smaller single water molecule. The single water molecule covers negative and positive ion of dissolve saline, which reduces electrostatic attraction and effective
collision, but increase water dipole moment and compatibility to negative and positive
saline, which finally loose pipe wall scale and to remove them.
Kill Bacterial and Algae
The electromagnetic wave creates turbulence flow, which destroys cell wall's ion channel and changes cell's living ambient. Cells die as of no suitable living area. What's more, large amount of single water molecules covers dissolve oxygen, which cut microorganism oxygen demanding so that to prevent microorganism sediment formation.
Rust Resist and Corrosion Prevention
Oxygen molecule in water become inert oxygen as covered by singe water molecule,
which cut off oxygen-demanding for mental rust. The electromagnetic field create "Skin-effect", which gathers negative charge inside pipeline wall. Water molecule covers positive charge, it rejects Fe ion dissolve from metal pipe. Negative charge on pipeline wall attract positive Fe ion to form Fe3O4 membrane.
Appication:
1. Refrigeration circulating water system;
2. Air-conditioning industrial cooling circulating water system;
3. Heat transfer system and cooling system hot water boiler, vegetable stove, bathing room, swimming pool and other equipment that scale due to heating;
4. Automotive Industry: painting, paint and paint filtration;
5. Electronics Industry: process water pre-treatment, tape coating agent, air pre-filtration;
6. Food and Beverage Industry: clarification and filtration of fruit juice, mineral water, milk, wine making, vinegar making, edible oil, syrup, etc;
7. Petrochemical, Pharmaceutical and Chemical Industries: particle removal filtration for lubricants, chemicals, oils, hot solvents, phosphate paints, etc;
8. Biopharmaceutical Industry: biology and fermentation, filtration of medical water, flushing water, high viscosity, cosmetics, etc;
9. Environmental Protection: industrial and domestic water, textile and paper wastewater, metal cutting fluid, cleaning agent filtration;
10. Printing, Furniture Industry: ink, paint, resin, wax filtration.
Certifications
Company Profile
Nanjing Beite Air Conditioning Equipment Co., Ltd. is a high-tech comprehensive enterprise specializing in the research and development, production, sales and after-sales service of HVAC water treatment equipment. Our company has two production plants, four standardized workshops and two office buildings, with a total area of 48,000 square meters. We mainly provide corresponding water treatment equipment for HVAC circulating water system with one-stop supply and service.
Our Advantages
Professional Team
Advanced Equipment
High Production Capacity
Warehouse Storage
Packaging & Shipping
FAQ
Q1: Can I have a sample ?
A : Yes, welcome to place sample order to test and check quality. Mixed samples are also OK.
Q2: What is your lead time for production?
A : Generally Sample needs 1-3 days,mass production needs 15-30 days,also depands on your request.
Q3 : Can you accept mixed batch of different products?
A : Yes,we can provide different product mix wholesale.
Q4: What payment terms do you accept?
A :Trade assurance,TT,Western Union.
Q5 : What is the warranty for your products?
A :We provide one year warranty for the products..
Q6 : Are you trading company or manufacturer?
A :Yes,We are manufacturer.Welcome to visit our factory and check our pruducts.
Q7: What terms of payment do you accept?
A: Payment method:T/T,Paypal,western union.
Q8: What is your delivery time?
A: Delivery term:15-30 working days.
Audited Supplier 
){kind=link}