Plate Heat Exchanger Unit Heat Exchange Unit Bellows Heat Exchanger Coil Heat Exchanger U Tube Heat Exchanger

• Customization: Available
• Warranty: 1 Year
• Application: Heater, Cooler, Vaporizer, Condenser
• Model NO.: BTR
• Principle: Recuperative Heat Exchanger
• Style: Steel Type
• Material: Stainless Steel
• Color: Customized Colour
• Working Temperature: 5ºC~300ºC
• Working Pressure: 0.6/1.0/1.6 MPa
• Industry: Petroleum/Chemical Processing/Food
• Type: Plate Type Volumetric Type
• Performance: Pressure Resistant, Temperature Resistant, Corrosi
• Gasket Material: NBR, HNBR, EPDM, Fluororubber, Silicon
• Transport Package: Plywood Case
• Specification: Different As Each Model
• Trademark: Beite
• Origin: Jiangsu China
• HS Code: 8419500090
• Production Capacity: 5000pieces/Year

Product Description

Product Description

The high-efficiency intelligent constant pressure plate-finheat exchange unit is equivalent to a complete "heat exchange station" and "constant pressure station", which concentrates heat exchange and control the pressure of the pipe network. The principle is that the heat medium on the primary side enters the plate heat exchanger through the temperature control system to release heat and then discharges into the condensate water tank; the low temperature water on the secondary side enters the plate heat exchanger through the circulating pump and then is sent out. The temperature sensor is located at the water outlet of the secondary side, which feeds back the temperature signal to the temperature control system, and adjusts the flow of the heat medium to control the temperature of the water outlet on the secondary side. The stabilized pump receives the pressure signal from the pressure sensor, and automatically supplies water to the pipe network. At the same time, the water also enters the constant pressure tank. When the water pressure of the pipe network reaches a certain pressure, the water supply is stopped. The constant pressure tank is used to keep the pressure of the pipe network constant.

 

1. Intelligent Control: The thermal unit adopts an intelligent water temperature automatic controller to make the water temperature intelligent control, that is, the water supply temperature automatically adjusts the water temperature according to the program settings.

 

2. Energy Saving: During the exchange of soda and water, a condensate water tank is set up to make full use of the heat of the condensate water.

 

3. Compact Structure and Small Footprint: The system water replenishment adopts diaphragm air pressure control or frequency conversion control, and at the same time, the condensate water tank, expansion water tank (except diaphragm air pressure control), and water replenishment tank are integrated to maximally compress the floor space.

 

4. Reliable Quality: Each component has been carefully designed and selected, and it has undergone strict process assembly and strict quality inspection, layer by layer, to ensure that each component is a qualified product.

 

5. Facilitate Centralized Management: The standard modular design of the plate heat exchanger unit is intelligent and centralized.
 

Install

 

1. The unit should be installed on the basis of 100-200mm above the ground, and flattened with rubber pads to prevent tilting, no need to fix.

 

2. When setting the foundation of the unit, a maintenance and operation space of 1-1.5m must be reserved around it.

 

3. When handling or installing, only use force on the basis of the unit, and pay attention to the protection of each part of the unit.

 

4. Strictly check whether the unit is abnormal before installation. After confirming that it is correct, connect the pipeline

correctly according to the random file.

 

5. Do a pressure test on the unit and connecting pipelines within the working pressure range.

Company Profile

Nanjing Beite Air Conditioning Equipment Co., Ltd. is a comprehensive high-tech enterprise that specializes in the research and development, production, sales, and after-sales service of HVAC water treatment equipment. Our company is equipped with two production plants, four standardized workshops, and two office buildings, with a total area of 48,000 square meters. Our main focus is to provide our customers with one-stop supply and service for their HVAC water treatment needs, and to help solve descaling, filtration, and system stability issues in water systems.

At Nanjing Beite Air Conditioning Equipment, we are dedicated to providing our customers with high-quality equipment and excellent customer service. Our products are designed to improve the performance and efficiency of HVAC systems, as well as other types of water systems, and can help reduce maintenance costs associated with mineral buildup and system instability. Whether you are in need of HVAC water treatment equipment or equipment for another type of water system, Nanjing Beite Air Conditioning Equipment is your go-to source for top-notch products and service.
 

FAQ

Q1: Can I have a sample ?

A : Yes, welcome to place sample order to test and check quality. Mixed samples are also OK.

Q2: What is your lead time for production?
A : Generally Sample needs 1-3 days,mass production needs 15-30 days,also depands on your request.

Q3 : Can you accept mixed batch of different products?
A : Yes,we can provide different product mix wholesale.

Q4: What payment terms do you accept?
A :Trade assurance,TT,Western Union.

Q5 : What is the warranty for your products?
A :We provide one year warranty for the products..

Q6 : Are you trading company or manufacturer?
A :Yes,We are manufacturer.Welcome to visit our factory and check our pruducts.

Q7: What terms of payment do you accept?
A: Payment method:T/T,Paypal,western union.

Q8: What is your delivery time?
A: Delivery term:15-30 working days.